We made it easy to remove and replace the straw on your Bentgo Kids Water Bottle and Bentgo Kids Stainless Steel Insulated Water Bottle. Just follow the step-by-step instructions below.
If you have any questions, we’d be happy to chat! Call us at 657-275-3738 or email support@bentgo.com
Removing the Straw
Step 1:
Twist the lid off.
Step 2:
Pull firmly on the straw to detach.
Step 3:
Flip open the protective cover.
Step 4:
Firmly pull out the bite valve from the bottom.
Note: extra force may be required.
Removing the Straw
Step 1:
Get your bite valve and hold it according to the diagram.
Step 2:
With the protective cover flipped open, insert the bite valve from the bottom and pull through.
To ensure the bite valve is secure, the circle stopper should be touching the lid and the rectangle groove should lock into place.
Step 3:
Attach the straw to the bottom of the valve with the stopper ring at the top and the grooves gliding into place. Twist the lid back on, drink up, and enjoy!
Cleaning Tip: For a deep clean, you can pull out every part of the water bottle, including the flip-up lid and the square piece that holds the bite valve in place.
Once clean, here’s how to reinstall those two parts:
Multi-column
To replace the flip-up lid, affix the tiny grooves on each side into the slots. The lid should be able to stay down.
Next, take the square piece and hold it so the larger grooves are at the top and the open rectangle cut-out faces the strap. Push it gently down with the lid still closed.
Multi-column
Pull back the flip-up lid.
Using your pointer finger and thumb, rotate the square piece around so that the tiny grooves on the piece are facing up and the open rectangle cut-out is below. Now you’re ready to add a new valve and straw!
Have any questions or concerns?
We’re here to help!
Give us a call at 657-275-3738 or email support@bentgo.com
